Samsung released firmware updates to many of its Galaxy devices recently. One of them is the Samsung Galaxy S4 that just received a December patch for its Android 5.0.1 Lollipop firmware. Here we are with the tutorial to update Galaxy Note 4 and its variants to the latest available firmware. Although there is no word from the manufacturer about the device receiving latest Lollipop or Marshmallow update, the listed firmware is a great deal for those who want to revert back to stock and grab the latest OTA updates as soon at it hits the device. So in order to get your device to the latest available firmware, hit the download section below. Verify your variant from the download link and then proceed. The procedure to flash the update using an Odin software has been listed below. However, before you proceed, it is highly recommended that you backup everything from Apps, Data, Media etc. It will perform a clean firmware flash via Odin and get you a brand new ROM.
Downloads
I9500XXUHOA7: Android 5.0.1 XXUHOA7 Firmware is now available at Android Officer. Download and install the XXUHOA7 5.0.1 Lollipop official firmware update on Samsung Galaxy S4 GT-I9500.The firmware update recently out by Samsung and the users can manually download I9500XXUHOA7 to update their device. The users can also update their device to this new. Oct 23, 2017 You can now update Samsung Galaxy S4 GT-I9505 to Android 8.0 Oreo. The firmware is custom developed on Android Open Source Project with stock Android base. Apr 22, 2018 How to Install Android 8.1 Oreo for Galaxy S4 LTE: Download the TWRP recovery for Galaxy S4 LTE from the Samsung TWRP recovery list. Install TWRP Recovery on Galaxy S4 LTE using ODIN Windows application. Enter into TWRP recovery mode and Wipe data partition, Cache partition, System partition and clean Dalvik cache.
Galaxy S4 GT-I9505 → Download | File: I9505XXUPOL1_I9505PHNPOL1_PHN.zip
Galaxy S4 GT-I9505 Android 5.0.1 Firmware → Link
Galaxy S4 GT-I9500 Android 5.0.1 Firmware → Link
Sprint Galaxy S4 SPH-L720 Android 5.0 Firmware → Link
AT&T Galaxy S4 SGH-I337 Android 5.0 Firmware → Link
T-Mobile Galaxy S4 SGH-M919 Android 5.0 Firmware → Link
Odin Software → Download | File: Odin3_v3.10.7_3.zip
Samsung Galaxy Drivers → Download | File: SAMSUNG_USB_Driver_for_Mobile_Phones.zip (15.3MB)
Warning: Although going through this procedure should not cause harm or any damage to your device, it remains an unofficial process and you should be cautious about it. We won’t be liable for any damages or a broken device. Reader’s discretion is advised.
Prerequisites
1. Verify your device for compatibility. Check out the download section.
2. Enable USB Debugging on your device. To do so, go to Settings>About Phone> Tap on the Build Number several times until you get a new Developer Options in the Settings. Open Developer Options and enable USB Debugging from there. Trust the connection by allowing it when you connect it to your PC for the first time.
Nba 2k13 free download for android 4.0.4. 3. Make sure you have latest device drivers setup on your PC for a better connection. Get it from the download section official from the manufacturer.
Samsung S4 I9500
4. To be sure, fully charge your device as the process make take a while.
How to Restore Samsung Galaxy S4 to Stock Marshmallow Firmware
Step 1: Download the listed firmwarefor your for your Galaxy device. Extract the zip file to get the firmware with .tar or .tar.md5 extension and place at a location where you can easily locate it in your PC.
Step 2: Now boot your device into Download/Odin Mode. To do so, turn off your device completely and then press and hold Power button + Volume Down + Home keys for a few seconds. If you see a warning sign press Volume up/ Volume down to get the Odin screen.
Step 3: If you already have Odin software on your PC then simply run the Odin3_3.10.7.exe file. If not, then download the Odin3.zip file from the download section and extract it. Run Odin software as administrator.
Step 4: While your device is still in the Odin Mode, connect your device to your PC using a USB cable.
Step 5: After a successful connection, the ID: COM in the Odin should turn Blue and an Added!! message should be displayed in the Log tab. In case your device doesn’t show up in Odin, then you can troubleshoot it with the steps given at the end of the tutorial.
Step 6: Now click on AP button and add the firmware file by navigating to the file path. Once added, it should show like this — File PathI9505XXUPOL1_I9505PHNPOL1_PHN.tar.md5
Step 7: Take care that only Auto Reboot and F.Reset Time are selected in the Options tab. Do not check Re-Partition.
Step 8: Once done, verify everything and proceed with installation by selecting Start button.
Step 9: When you get a PASS! message in the Log tab on your Odin software, that means firmware has successfully been installed and the device will restart itself. If not then reboot manually.
When you see the boot animation, you can enjoy your new firmware. Be patient as first boot may take a while. However, if the system doesn’t boot up for a long time, then go through the following.
How to Fix Bootloop on Samsung Galaxy Device?
If you come across boot loop or your Samsung Galaxy device is stuck at the boot logo then factory reset your device from the recovery. To do so, turn of your device (also remove the battery if applicable and put it back again) and reboot into recovery mode by press and holding Power + Volume down + Home keys for a few seconds. From the Recovery, select Wipe Data / Factory Reset. Confirm the action and reboot once done. Your device should now boot up.
Galaxy S4 I9500
How to Troubleshoot Connectivity problem on Samsung Galaxy Device?
If your device doesn’t show up in the Odin software, then turn off USB Debugging and turn it on again and Reboot. You can also reinstall the Samsung USB Drivers or try changing the USB cable and connection ports from device manager.
Like and share us on social media. For any help or queries, comment down below. Get in touch with us if you want to know more about the installation procedure or the device. If you come across any errors let us know.
Also See:
Related Content
Its been a long time since Samsung launched its Samsung Galaxy S4 handset, it was launched way back in 2013. Samsung has terminated the official software support for the device which is a normal factor as hardly from any smartphone brand exists in the market which provides software support for a smartphone which is too old.
It’s also been shown that applying this mode can help reduce battery consumption. Although it may seem like a trend, the truth is that you can prevent eye strain caused by screens by simply activating this option. In fact, if your smartphone has an OLED screen, each black pixel will turn off. Free download for skype for android tablet. How to activate night mode in your favorite Android appsIn recent months, a bunch of apps have launched a night mode or dark theme.
A lot of unofficial development has been made for the device which is more than enough to make the Galaxy S4 users happy, by those methods one can enjoy the latest Android versions on his/her old handsets.
Today we are back with some crazy stuff for those who are still in love with their old Galaxy S4 and this data is all about the way by which you can get the fresh Android 8.1 Oreo on your handset. In today’s article, we will be discussing the Substratum ROM which is just a modified version of the AOSP ROM.
This ROM is currently in Beta phase which means users may have to face some issues related to software. For installing it, you need to have a rooted device whose bootloader must be unlocked. If you own a global variant, then its bootloader comes unlocked by default, but if you are a Verizon or AT&T user, then you will have to put some extra efforts to do it. The further steps will void your device’s warranty, and nothing can be better than taking a complete backup of your device before jumping ahead.
How to Install TWRP Recovery on Samsung Galaxy S4?
Since no official TWRP recovery is available for the device, so we are using an unofficial one which works fine. You have to download ADB and Fastboot on your PC/Laptop before doing anything, follow the below steps carefully:
- ) Firstly enable USB debugging on your smartphone by going to developer options.
- ) Now we assume that you have correctly installed the ADB and Fastboot on PC/Laptop.
- ) Download the TWRP file from the links given below and rename it as twrp.img, move the downloaded file to PC in the ADB directory.
- ) Now connect your device to PC by a working USB cable.
- ) Go to ADB directory and start the command prompt by pressing Shift+Right click anywhere, then press “w” on keyboard.
- ) Give the below-mentioned command to enter the Bootloader mode:
abd reboot bootloader
- ) After entering the bootloader mode give the below-mentioned command to flash the TWRP recovery:
fastboot flash recovery twrp.img
- ) As the twrp completes the installation, give the below-mentioned command to reboot:
fastboot reboot
- ) Now your phone will reboot, and your device is now equipped with a custom recovery.
How to Install Android 8.1.0 Oreo on Samsung Galaxy S4
The ROM has been developed by JDCTeam, the phone variants supported by ROM are I9505, I9505G, I9507, I9508, I337, M919, I545, R970, L720, S970G, S975L. This ROM contains some issues, according to the source Camera app is half broken, NFC is not present, and it is yet to be tested on CDMA models, etc.
- ) Download the ROM and Gapps package from the links given below.
- ) Put these files into your SD card and make sure that your device should have 60% or above charge remaining.
- ) Boot into recovery mode by long pressing Home button+Vol up+Power button.
- ) Now Wipe data/factory reset the device.
- ) Click on the Install option and locate the ROM zip file from the SD card, now swipe to install.
- ) As it finishes the installation again press the Install option and locate the Gapps file, swipe to install.
- ) After installation select the Reboot option, the device might take a little extra time to reboot, but now you have the latest Android Oreo firmware on your Galaxy S4.
Download TWRP recovery for Galaxy S4
Download the Oreo ROM zip file
Download Gapps for Android 8.0 Oreo
Perform the above steps at your own risk; we are not responsible for any mishappening to your device.
AMD-vt or Intel VT-x capable CPU. 1GB RAM. Minimum System Requirments. 1gb pc games free download.